The ink pad that stampers reach for when the surface is not paper — and often when it is. StazOn is the world's leading multi-surface stamp ink, made by Tsukineko and trusted by crafters, artists, and makers worldwide for its ability to adhere permanently and clearly to surfaces that defeat every other stamp ink. The Jet Black is the most widely used colour in the range — a dense, true, opaque black that produces crisp, high-contrast stamped impressions on almost any surface imaginable.
The key is the solvent-based formulation. Where dye-based and pigment inks are water-based and require a porous surface to absorb and hold them, StazOn uses a solvent carrier that bonds with non-porous surfaces — glass, metal, ceramic, acrylic, plastic, cellophane, aluminium foil, leather, shrink plastic, coated paper, vellum, and glazed surfaces that would repel a standard ink entirely. The dried impression is permanent, waterproof, and acid-free, making it suitable for finished work intended to last.
The pad has a raised surface — elevated above the rim of the case — which allows stamps of any size to be inked evenly, including larger stamps that would otherwise not fit flat against a recessed pad. The inner plastic cover keeps the pad moist between sessions — replace it immediately after use and keep the outer lid firmly closed, as exposure to air will cause the solvent ink to dry out.
Cleaning is the one important point of attention with StazOn. The solvent ink will damage rubber and clear acrylic stamps if left on them — clean stamps immediately after use with StazOn All-Purpose Stamp Cleaner. Do not use water or standard stamp cleaner, which will not remove solvent ink effectively.
On porous surfaces such as paper and card, StazOn dries in seconds. On non-porous surfaces, allow up to five minutes for full cure before handling.
Ink type: Solvent-based — permanent, waterproof, acid-free
Colour: Jet Black
Pad size: Approximately 7.5 x 5cm usable area
Suitable for: Glass, metal, ceramic, plastic, acrylic, leather, vellum, coated paper, cellophane, shrink plastic, and most non-porous surfaces
What makes StazOn different from standard stamp ink?
StazOn uses a solvent-based formula rather than a water-based one, allowing it to adhere permanently to non-porous surfaces — glass, metal, plastic, ceramic, leather, and coated paper — where standard dye and pigment inks will not stick. It is the go-to ink wherever a surface is too smooth or non-absorbent for conventional stamp ink.
Does StazOn work on paper?
Yes — it works on paper and card as well as non-porous surfaces, drying almost instantly on porous materials. It is acid-free and archival, making it suitable for card making, scrapbooking, and any paper-based stamping project as well as multi-surface work.
How do I clean my stamps after using StazOn?
Use StazOn All-Purpose Stamp Cleaner immediately after use — do not leave StazOn ink on stamps as it will cure and become very difficult to remove. Standard stamp cleaner and water are not effective on solvent ink.
Can the ink pad be refilled?
Yes — StazOn Jet Black refill ink is available separately, allowing the pad to be re-inked rather than replaced when it runs dry.
