The sewing pin that earns its place in every sewing kit by being precisely what a straight pin should be — sharp, smooth, consistent, and reliable. The Milward 2111112 is a fine 30mm x 0.5mm straight pin made from hardened and tempered steel with a small steel head, supplied in a plastic box within a blister pack. A 15g pack contains a practical working quantity for everyday dressmaking, patchwork, quilting, and general sewing use.
The quality of a sewing pin reveals itself immediately in use. A sharp, well-made pin slides between fabric layers cleanly and precisely without snagging, pulling, or distorting the weave — and a pin that does any of those things slows a project down and can leave permanent damage in fine fabrics. The points on Milward pins are thin and very sharp, and the full needle is clear of burrs or faults, meaning they slide perfectly between layers of fabric with ease. The hardened and tempered steel resists bending under normal use, and the anti-rust coating keeps them in good condition through years of regular sewing. Higgs & Higgs
The small steel head is a practical detail worth noting. Bulky plastic or glass-headed pins require the iron to navigate carefully around each one during pressing — the small steel head sits low enough that pressing can proceed more freely without the constant risk of catching a pin head or melting a plastic head with the iron.
At 0.5mm diameter the 2111112 is a fine pin — slim enough to work cleanly with medium to lightweight fabrics including cotton, linen, polyester, jersey, and similar dress and craft fabrics. Supplied in a reusable plastic box, suitable for desktop and sewing kit storage.
Pin length: 30mm Pin diameter: 0.5mm Material: Hardened and tempered steel, anti-rust coating Head: Small steel head Pack weight: 15g Storage: Plastic box in blister pack
What is the difference between different pin diameters? Finer pins — 0.5mm and below — are better suited to lightweight and medium fabrics where a thicker pin would leave visible holes or distort the weave. Thicker pins — 0.6mm and above — are more robust and better suited to heavier fabrics and multiple layers. The 0.5mm diameter of the 2111112 makes it a good all-purpose pin for most standard dress and craft fabrics.
Why does pin quality matter? A sharp, burr-free pin slides into fabric cleanly without snagging, distorting the weave, or leaving visible holes. A poor quality or blunt pin drags through fabric, pulls threads, and can permanently damage fine or sheer materials. Replacing pins regularly — and starting with quality pins — makes a noticeable difference to the ease and precision of sewing work.
Can they be used for quilting and patchwork? Yes — 30mm straight pins are a practical general purpose length for quilting, patchwork, dressmaking, and craft sewing. For quilting through thick wadding, longer pins or specialist quilting pins may be more appropriate.
